CoverSafe Mat

CoverSafe Mat is a lightweight, adjustable roof safety matting system designed to provide temporary fall prevention and a stable working platform during timber-frame and traditional house construction. Manufactured from aluminium and featuring innovative XSpan technology, CoverSafe Mats expand across suitable exposed ceiling joists to help prevent workers from falling through roof spaces during construction, refurbishment and maintenance activities.

Solutions
Get In Touch

CoverSafe Mat From Barton

Developed by Oxford Safety Components, CoverSafe provides a practical alternative to traditional timber boards for suitable roof construction applications. Its expandable design allows the mats to accommodate different working areas, while the interlocking arrangement and securing straps help create a temporary working platform above exposed structural members.

At Barton Safety Services, we supply CoverSafe Mats across Belfast, Northern Ireland and the UK, helping housebuilders, roofing contractors and construction teams improve safety when working around exposed roof joists, trusses and other elevated construction areas.

What Is a CoverSafe Mat?

A CoverSafe Mat is a purpose-designed temporary roof safety matting system used to provide fall prevention and working access across exposed ceiling joists and suitable structural members.

During the construction of residential and commercial buildings, workers frequently need to access roof spaces before permanent flooring, ceilings or other protective surfaces have been installed. This can create significant fall hazards, particularly where gaps remain between ceiling joists.

CoverSafe addresses these challenges through an expandable aluminium matting system that creates a defined temporary working surface.

The mats incorporate Oxford Safety Components' XSpan technology, allowing them to expand and adjust to different coverage requirements. Multiple mats can also be interlocked to provide protection across larger areas, subject to the manufacturer's installation requirements.

CoverSafe is particularly suitable for timber-frame and traditional house construction, where workers may need temporary access during roof truss installation, wind bracing, roofing preparation and other construction activities.

Unlike general-purpose timber boards, CoverSafe is specifically designed for temporary fall prevention and working access when installed and used in accordance with its approved configuration.

Get In Touch

Why Is Roof Safety Matting Important During Construction?

Roof construction can expose workers to a variety of hazards, particularly during the early stages of a building project.

Before permanent flooring, ceilings and other protective structures are completed, workers may need to move across areas containing exposed joists, beams and roof trusses.

Without suitable access arrangements, these conditions can increase the risk of falls and injuries.

Falls Through Exposed Ceiling Joists - Exposed ceiling joists can create significant gaps within a roof structure.

Workers carrying out construction activities may need to operate above these openings while installing structural components or completing associated work.

Where suitable protection is not provided, there is a risk of falling between the joists to the level below.

Temporary roof safety matting helps control this hazard by providing a defined working surface across suitable supporting members.

Working Around Roof Trusses - Roof truss installation requires workers to position, secure and brace structural components.

These activities can involve working within partially completed roof structures where permanent working platforms are not yet available.

CoverSafe can provide temporary working access for suitable activities during this stage of construction.

Restricted Working Space - Roof structures frequently contain timber members, braces and other components that restrict movement.

These conditions can make conventional access equipment difficult to position.

Adjustable roof safety matting provides flexibility where the structure and installation arrangement are suitable.

Temporary Working Access - Construction teams often need temporary access to complete work before the roof structure is fully finished.

A purpose-designed matting system can provide an appropriate working surface without relying on improvised arrangements.

Protecting Workers During Remedial Work - Roof structures may also require inspection, repair or remedial construction activities.

Where exposed ceiling members create fall hazards, suitable temporary protection may be required to allow the work to be completed safely.

Get In Touch

How Does the CoverSafe Mat Work?

The CoverSafe Mat uses an expandable aluminium construction to create a temporary working platform across suitable exposed roof or floor members.

The system is designed to be adjusted, interlocked and secured according to the manufacturer's installation instructions.

1. Position the Mat Across Suitable Joists - The mat is positioned over suitable structural members after the supporting arrangement has been assessed.

The correct positioning is essential to ensure the system is adequately supported and appropriate for the intended work.

2. Expand the Aluminium Mat - CoverSafe incorporates XSpan technology, allowing the mat to expand and adjust to the required coverage area.

This helps the system accommodate different roof structures and working requirements.

3. Interlock and Secure the Mats - Where multiple mats are required, they can be interlocked using the manufacturer's specified arrangement.

CoverSafe also incorporates securing straps to help maintain the correct positioning of the system.

All components must be installed according to the current manufacturer instructions.

4. Create a Temporary Working Platform - Once correctly installed, secured and checked, the matting provides a defined temporary working surface for suitable construction activities.

The system must only be used within its approved loading limits and intended application.

Get In Touch

Benefits of the CoverSafe Mat

The CoverSafe Mat offers several practical advantages for contractors carrying out work around exposed roof members and temporary floor openings.

Temporary Fall Prevention - CoverSafe provides a purpose-designed working surface across suitable exposed ceiling joists.

When correctly installed, the system helps reduce the risk of workers falling through gaps within the roof structure.

This is particularly valuable during construction activities where permanent protective surfaces have not yet been completed.

Lightweight Aluminium Construction - The aluminium design provides a combination of strength and manageable weight.

Individual mats can be transported and positioned without the bulk associated with some traditional temporary access materials.

Adjustable XSpan Technology - CoverSafe's expandable design allows contractors to adjust the matting to accommodate different coverage requirements.

This flexibility is particularly useful on construction projects where roof layouts and working areas vary.

Efficient Installation - CoverSafe has been designed for practical installation on suitable roof structures.

Published manufacturer information indicates that certain configurations can be installed in approximately 20 minutes, although actual installation times depend on the working area, number of mats and site conditions.

Reusable Across Construction Projects - CoverSafe Mats can be removed, inspected and reused on other suitable projects.

This makes them particularly relevant to housebuilders and roofing contractors who regularly require temporary working platforms.

Suitable for Timber-Frame Construction - The system is designed for applications involving exposed ceiling joists and roof structures.

This makes CoverSafe particularly useful during timber-frame housebuilding and associated roofing activities.

Corrosion-Resistant Aluminium - Aluminium offers resistance to corrosion in typical construction environments.

However, the mats should still be inspected and maintained according to manufacturer guidance, particularly following exposure to harsh conditions.

Supports Efficient Roof Construction - Providing a defined temporary working platform can help contractors organise suitable roof construction activities without repeatedly relying on improvised access arrangements.

Get In Touch

Where Can CoverSafe Roof Safety Matting Be Used?

CoverSafe is primarily designed for temporary fall prevention and working access during suitable construction activities.

Timber-Frame Housebuilding - Timber-frame construction is one of CoverSafe's principal applications.

During roof construction, workers may need to operate above exposed ceiling joists before permanent protective surfaces are installed.

CoverSafe provides a purpose-designed solution for suitable working arrangements during this stage.

Traditional House Construction - The system can also be used during traditional construction projects where suitable exposed structural members require temporary protection.

Residential Developments - Housebuilders working across multiple plots may benefit from reusable roof safety matting that can be transferred between suitable properties.

Roof Truss Installation Projects - CoverSafe can provide temporary access for suitable activities associated with roof truss positioning, bracing and installation.

Construction Site Roof Spaces - Partially completed roof spaces can present fall hazards where workers need access across exposed members.

CoverSafe may provide a suitable temporary working surface when correctly configured.

Floor Refurbishment Projects - Certain refurbishment activities may involve exposed floor joists or temporary openings.

CoverSafe can be considered where the structure and intended application meet the manufacturer's requirements.

Get In Touch

What Is the CoverSafe Mat Used For?

CoverSafe roof safety matting is designed for a range of construction activities where workers require temporary access across suitable exposed structural members.

Roof Truss Installation - During roof truss installation, workers may need access to areas where ceiling joists and structural members remain exposed.

CoverSafe can provide temporary working access for suitable activities associated with positioning and securing roof trusses.

Spreading Roof Trusses - Roof trusses often need to be distributed and positioned across a building before final installation.

Temporary safety matting can provide an appropriate working surface for certain activities within the roof structure.

Installing Wind Bracing - Wind bracing helps provide stability to roof structures.

Installing these components may require workers to access areas above exposed ceiling joists.

CoverSafe can provide temporary access for suitable bracing installation work.

Roof Felt Installation - Roofing preparation and felt installation may involve associated work within partially completed roof structures.

Where appropriate, CoverSafe can provide a temporary working surface for supporting construction activities.

Roof Tiling Activities - Roof tiling projects can involve work around exposed roof structures and supporting members.

CoverSafe may provide temporary access for suitable associated activities, although it is not a substitute for roof edge protection, external access equipment or other necessary fall prevention measures.

Roof Inspections - Construction teams may need to inspect roof components before completing the structure.

Temporary matting can provide working access where exposed ceiling members would otherwise present a fall hazard.

Remedial Roof Work - Repairs and remedial construction activities may require access to exposed structural members.

CoverSafe can provide a temporary working platform where the installation conditions are suitable.

Floor Refurbishment - The system may also be appropriate for certain refurbishment activities involving exposed floor members.

Its suitability depends on the supporting structure, intended loading and manufacturer requirements.

Get In Touch

CoverSafe Mat Standards and Work at Height Compliance

CoverSafe is designed to support safer working arrangements during construction activities involving exposed roof members.

Published Oxford Safety Components information identifies the CoverSafe Mat as conforming to BS 8630:2019.

Current manufacturer documentation should be consulted to confirm the applicable product standard and technical requirements.

BS 8630:2019 - The manufacturer identifies BS 8630:2019 in its published CoverSafe product information.

Contractors should ensure that the supplied equipment and installation arrangement are consistent with the relevant manufacturer requirements.

Work at Height Regulations 2005 - The Work at Height Regulations 2005 require work at height to be properly planned, appropriately supervised and carried out using suitable equipment by competent people.

Where work at height cannot reasonably be avoided, suitable measures must be selected to prevent falls or minimise their consequences.

CoverSafe can form part of these arrangements where it is appropriate for the structure and intended activity.

Maximum Working Load - CoverSafe has a published maximum spread load of 150kg.

This limit must not be exceeded, and the complete working arrangement must be suitable for the intended loading.

Correct Installation - The mats must be correctly positioned, interlocked and secured according to the manufacturer's instructions.

The supporting structure must also be capable of accommodating the intended installation and loading.

Competent Users - Workers responsible for installing, inspecting and using CoverSafe should have appropriate instruction, knowledge and competence.

Using CoverSafe does not automatically make every roof construction activity compliant. A suitable risk assessment and safe system of work remain essential.

Get In Touch

Why Choose Barton Safety Services?

Barton Safety Services has more than 30 years of experience in work-at-height safety, fall prevention and specialist access solutions.

We understand the challenges associated with temporary construction environments, including exposed ceiling joists, roof structures and the need for suitable working platforms.

Our team supplies a comprehensive range of equipment designed to help contractors manage these risks.

Specialist Work at Height Knowledge - We work with construction contractors, facilities managers and commercial organisations to help identify suitable fall protection and access equipment.

Construction Safety Solutions - Our product range includes specialist systems for temporary working access, exposed openings and other construction-related fall hazards.

Oxford Safety Components Product Range - Barton supplies CoverSafe alongside other Oxford Safety Components products, including CoverSafe Spark, CoverSafe Access, CoverSafe Trench and StairSpan.

Practical Product Selection Advice - Different construction environments require different access arrangements.

Our team can help contractors understand the available products and identify suitable equipment for their working requirements.

Training and Inspection Support - Barton also provides work-at-height training and inspection services to support organisations responsible for maintaining safe equipment and working practices.

Northern Ireland and UK Coverage - Based in Belfast, Barton Safety Services supports housebuilders, roofing contractors and commercial organisations throughout Northern Ireland and the wider UK.

Get In Touch

Improve Roof Construction Safety with CoverSafe Mats

Working around exposed ceiling joists and partially completed roof structures can present significant fall hazards.

Housebuilders, roofing contractors and construction teams need suitable temporary access arrangements that allow work to progress without exposing workers to unnecessary risks.

The CoverSafe Mat provides a purpose-designed solution for suitable roof construction applications.

Its lightweight aluminium construction, adjustable XSpan technology and interlocking arrangement help create a defined temporary working platform across exposed structural members.

For contractors managing multiple construction projects, the reusable design can also provide practical advantages by reducing reliance on improvised temporary access arrangements.

By selecting the correct system and ensuring it is properly installed, inspected and used, contractors can improve the management of fall hazards during roof construction and refurbishment.

Get In Touch

Contact Barton Safety Today

Barton Safety Services supplies CoverSafe Mats across Belfast, Northern Ireland and the UK.

Whether you require temporary roof safety matting for timber-frame construction, fall prevention during roof truss installation or advice on suitable working platforms for exposed ceiling joists, our team can help.

Contact Barton Safety Services today to discuss your CoverSafe Mat requirements and find a suitable roof safety matting solution for your project.

Get In Touch

Barton Solution Map

menu