Kee Walk® Rooftop Walkway

Solutions
Kee Walk® Rooftop Walkway is a modular roof access system designed to create safe, clearly defined and slip-resistant routes across commercial and industrial rooftops.
Whether workers need to access HVAC equipment, solar panels, drainage systems or other rooftop plant, Kee Walk® provides a dedicated walking surface that helps improve footing, control access routes and protect the roof from repeated foot traffic.
The system can be configured for different roof types, slopes and layouts, with integrated guardrails available where additional collective fall protection is required. Kee Walk® can also be combined with step overs, platforms and other rooftop safety systems to create a complete safe-access solution.
Get In Touch

Kee Walk® Rooftop Walkway from Barton Safety Services

At Barton Safety Services, we survey, design, install, inspect and maintain Kee Walk® Rooftop Walkway systems across Belfast, Northern Ireland and the UK. With more than 30 years of experience in work-at-height safety and safe access, we can design a walkway system around the way your roof is actually accessed and maintained.

What Is Kee Walk® Rooftop Walkway?

Kee Walk® Rooftop Walkway is a purpose-designed access system that creates a designated walking route across a roof.

Instead of maintenance personnel repeatedly walking directly across the roof surface, Kee Walk® provides a stable pathway between the roof access point and the areas workers need to reach.

This can help:

  • Provide a defined rooftop access route
  • Improve underfoot grip
  • Reduce slips and trips
  • Protect roof surfaces from repeated foot traffic
  • Direct workers away from identified hazards
  • Improve access to rooftop plant and equipment
  • Support safer routine maintenance
  • Integrate with guardrails and other fall protection systems

Kee Walk® is modular, allowing individual installations to be configured around the roof layout, access requirements and maintenance areas.

Why Are Rooftop Walkways Important?

Commercial roofs are often treated as areas that are rarely accessed. In reality, many rooftops contain equipment that requires regular inspection, servicing and repair.

This can include:

  • Air-conditioning equipment
  • HVAC systems
  • Solar panels
  • Ventilation equipment
  • Roof drainage
  • Communications equipment
  • Extract systems
  • Building management equipment
  • Rooflights and access hatches

Without a designated route, engineers and contractors may take different paths across the roof every time they visit.

This can expose workers to unnecessary hazards while also increasing wear on the roof surface.

A professionally designed rooftop walkway creates a clear route from the access point to the work area, helping building owners and facilities managers control how people move across the roof.

Get In Touch

How Does Kee Walk® Rooftop Walkway Work?

Kee Walk® uses modular walkway sections to establish a dedicated access route across the roof.

A typical system is designed through the following process.

1. The Roof Is Surveyed

The roof layout is assessed to identify:

  • Access points
  • Maintenance areas
  • Rooftop plant
  • Exposed edges
  • Rooflights
  • Fragile areas
  • Changes in level
  • Pipes and ducts
  • Other potential hazards

2. The Safest Access Route Is Identified

Rather than simply installing a walkway in a straight line, the route should reflect how people need to use the roof.

The aim is to provide safe access from the entry point to the equipment or area requiring maintenance.

3. Kee Walk® Is Configured Around the Roof

Modular walkway sections can then be positioned to create the required route.

4. Slip-Resistant Treads Provide a Defined Walking Surface

The open-tread surface provides grip while allowing water to drain rather than collect on the walkway.

5. Additional Fall Protection Is Added Where Required

If the walkway passes close to an exposed edge or other fall hazard, guardrails or an appropriate personal fall protection system can be incorporated into the overall design.

The result is a rooftop route designed around the building and the work that needs to be completed.

Get In Touch

Benefits of Kee Walk® Rooftop Walkways

Slip-Resistant Walking Surface - Rooftops can become slippery because of rain, frost, moss, debris and other environmental conditions.

Kee Walk® provides a dedicated slip-resistant walking surface designed to improve footing for workers moving across the roof.

Its open-tread construction also allows effective drainage, helping reduce standing water on the access route.

Protects the Roof Surface - Repeated foot traffic can contribute to wear and damage on roof coverings.

Maintenance engineers may also inadvertently step on vulnerable areas while carrying equipment or moving between plant locations.

By directing traffic onto a dedicated walkway, Kee Walk® can help reduce unnecessary foot traffic across the surrounding roof surface.

Creates a Clearly Defined Access Route - A rooftop walkway helps remove uncertainty about where workers should travel.

Rather than allowing each contractor to select their own route, facilities managers can establish an approved pathway between access points and maintenance areas.

This can form an important part of a wider roof safety strategy.

Modular and Adaptable - Commercial roofs frequently contain obstacles, corners, changes in level and irregular layouts.

Kee Walk® is modular, allowing the system to be configured around the individual building rather than relying on a standard one-size-fits-all arrangement.

Suitable for New and Existing Buildings - Kee Walk® can be incorporated into new developments or retrofitted to existing commercial and industrial buildings.

This makes it suitable for both new rooftop safety projects and upgrades to existing access arrangements.

Integrates with Other Safety Systems - A walkway does not necessarily solve every rooftop hazard.

Kee Walk® can form part of a wider safety system incorporating:

This allows the complete journey across the roof to be considered rather than treating individual hazards in isolation.

Get In Touch

Kee Walk® Rooftop Walkway Standards and Compliance

Rooftop access systems should be designed and installed with consideration for applicable UK legislation, relevant standards and manufacturer requirements.

Work at Height Regulations 2005 - Work at height should be properly planned, supervised and carried out using appropriate equipment and control measures.

Where roof access is necessary, the risks associated with the entire route should be assessed.

EN 516 - Kee Walk® walkway systems are tested and certified to the applicable requirements of EN 516 Class 1-C for prefabricated roof access accessories.

EN ISO 14122-3 - Where guardrails form part of the system, relevant requirements for permanent means of access and guardrail protection should be considered.

EN 13374 - Relevant guardrail configurations may also be designed in accordance with applicable edge-protection requirements.

The exact standards applying to an installation depend on the system configuration and intended application. Compliance should therefore be established through appropriate design, installation and assessment rather than assumed solely from the product name.

Get In Touch

Where Is Kee Walk® Rooftop Walkway Used?

HVAC Maintenance - Heating, ventilation and air-conditioning equipment is one of the most common reasons for regular commercial roof access.

Kee Walk® can provide a defined route from the roof access point to HVAC units, helping engineers reach equipment without repeatedly crossing the roof surface.

Solar Panel Access - Commercial solar installations require inspection, cleaning and maintenance.

Walkways can provide designated routes around solar arrays while helping reduce unnecessary foot traffic on surrounding roofing materials.

Roof Inspections - Surveyors, facilities teams and roofing contractors may need regular access to inspect membranes, drainage, flashings and other roof components.

A permanent walkway provides a consistent approved route.

Gutter and Drainage Maintenance - Roof outlets, gutters and drainage systems require regular inspection and clearing.

Kee Walk® can improve access to these maintenance locations, with additional edge protection incorporated where required.

Communications Equipment - Satellite dishes, antennas and other communication equipment often require periodic maintenance.

A designated walkway can help engineers access these installations safely and efficiently.

Air Handling and Ventilation Equipment - Large commercial buildings may contain extensive rooftop air-handling equipment.

A network of walkways, platforms and step overs can create a structured access system around the plant area.

Get In Touch

Kee Walk® Rooftop Walkway for Different Industries

Commercial Offices - Office buildings often contain rooftop HVAC systems, communications equipment, solar installations and drainage infrastructure.

Kee Walk® can create defined maintenance routes while helping protect the roof from repeated contractor access.

Warehouses and Distribution Centres - Large warehouse roofs can contain extensive solar arrays, ventilation equipment and rooflights.

Clearly defined rooftop walkways can help guide workers across these large roof areas.

Manufacturing Facilities - Manufacturing plants may require frequent access to extraction systems, ventilation equipment and other rooftop machinery.

Kee Walk® can form part of a wider access system incorporating platforms, step overs and guardrails.

Hospitals and Healthcare Facilities - Hospitals often depend on rooftop mechanical equipment that requires regular maintenance.

Permanent access routes can help engineers reach critical building services efficiently while supporting safer working practices.

Schools and Universities - Educational buildings may require routine roof access for maintenance, inspection and plant servicing.

Dedicated walkways can provide a clear route for authorised contractors.

Retail and Leisure Buildings - Shopping centres, supermarkets, hotels and leisure facilities frequently contain extensive HVAC and refrigeration equipment.

Kee Walk® can help facilities teams establish repeatable access routes to these systems.

Get In Touch

Why Choose Barton Safety Services?

With over 30 years of experience in work-at-height safety and safe access, Barton Safety Services provides complete rooftop access solutions for organisations across the UK.

We provide:

  • Professional roof surveys
  • Rooftop risk assessments
  • Kee Walk® system design
  • Walkway installation
  • Guardrail integration
  • Step-over and platform installation
  • Inspection and maintenance
  • Wider fall protection solutions

We work with:

  • Facilities managers
  • Building owners
  • Commercial property managers
  • Main contractors
  • Manufacturers
  • Warehousing and logistics companies
  • Healthcare organisations
  • Schools and universities
  • Retail and leisure operators

Our focus is on protecting the complete access route rather than treating the walkway as an isolated product.

Get In Touch

Contact Barton Safety Today

If you need safer access to HVAC equipment, solar panels, drainage systems or other rooftop plant, Barton Safety Services can design a Kee Walk® Rooftop Walkway around your building and maintenance requirements.

We provide site surveys, design, installation, inspection and maintenance of Kee Walk® rooftop walkway systems across Belfast, Northern Ireland and the UK.

Contact Barton Safety Services today to arrange a rooftop safety survey and discuss the right Kee Walk® solution for your building.

Get In Touch

Kee Walk Rooftop Walkway in Action

Get In Touch

Brochure Downloads

Barton Solution Map

menu